Plastic & Rubber

Food & Beverage

Data Centers

Process Cooling

Gas Turbine Air cooling

Biogas

Power Grid

Organic Rankine Cycle (ORC)

Air Compressor cooling

Data Center Cooling

Automotive

Innovative integrated cooling system for injection molding of automotive components.

Learn more

Adiabatic Cooling

Mold Profit Booster

High Performance TCU with chiller

Standard TCU

Air Cooled Chillers

Modular Chillers

Pumping Stations and Accessories

Digital Control Devices

Special solutions

Integrated Cascade Refrigeration System

Ecodry LDK Large

Ecodry - LDK Large
The New Generation of Adiabatic Coolers

Learn more

Mold Profit Booster with increased heating capacity, assisted by AI.

Dynamico DHM is a DS model with increased heating capacity for reduced process warm-up time and for applications requiring high heating capacity, with the following highlights:

Increased heating capacity: doubled heating elements compared to the same sizes of Dynamico DS
Only single zone (M) version
Pressurized circuit: Direct injection cooling. Pressurized circuit via central cooling system supply.

The New "Dynamic Mold Temperature Control Technology" allows cycle time optimization by reducing the cooling time, based on:

Dedicated Mold Control – The unit guarantees precise temperature control and dedicated high flow rate, per IMM and per mold.
Dynamic Temperature Control – The unit automatically changes the temperature set point.
Dynamic Flow Control, Syncro Mode (available only with VFD pumps) – By synchronizing the inverter driven pump with the molding cycle, the unit performs “deep cooling” only during the cooling phase of the cycle, further reducing molding cooling time.

Request Information

Frigel dynamico mold profit booster dhm img01

Advantages Features Fields of application Other solutions

Advantages

Increased Productivity for Injection Molding

Proven Productivity Increase: at least 20% in most existing molds running with all kinds of resins (PA, ABS, PC, PP, etc.) and up to 40% in some cases.
Shorter Start Up Times: mold pre-heating up to 20% faster than with a conventional temperature control unit.
Lower Operating Cost (kW/part) of -12%: cycle time reduction improves the efficiency of the entire production cell (cost savings per part produced).
Return On Investment in Short Time: increased productivity with lower energy costs take an unbeatable ROI.
Floor Production Capacity +20%: the replacement of existing TCUs represents an excellent way to increase production capacity of the shop floor with the lower CAPEX demand.

Features

Engineered for Injection Molding

Advanced Digital Control with Wizard
Direct Cooling: Maximum Temp. Set Point: 90 °C
Min. Set Point of +2 °C above Central Cooling System
Production rates from 30 kg/h up to 400 kg/h
Single zone
Booster pumps up to 50 m3/h - 5,5 bar
Heating capacity up to 48 kW
High cooling capacity with motorized modulating valve
High efficiency centrifugal pump with stainless steel impeller (SS volute up to size 180 included) provide high flow and pressure
Proportional Modulating Valve guarantees precise temperature control
Mold drain kit (optional)
Assisted by artificial intelligence, for progressively improved future performance