High Precision Controllers for High Temperatures
The TRP series of Thermogel units are pressurized water temperature controller with indirect cooling. TRP
have been made to condition molds and cylinders in the plastic and rubber sector, as an alternative to the
traditional diathermic oil units.
The TRP guarantee high precision and production quality, a maximum process repetitiveness and efficiency,
minimum operating costs, practicality and safety of use.
--------------------------------------------------------------------------------------------------------------------------------------------------------
- The TRP are equipped with sophisticated electronics
and a particular hydraulic circuit which allow a high
precision to be obtained in controlling the operating
temperature (± 0.3°C).
- Heat exchanger with “cold” operation to eliminate the
problem of scale inside the exchanger itself.
- The control panel is characterised by a simple and
easy-to-use interface with a display for reading the
temperature with large characters and a large
alphanumerical management screen.
- Various parameters and the machine status can be
controlled by means of a powerful microprocessor
and the operating parameters and alarm messages
can be visualised continually. All the messages are
displayed in the language selected by the operator,
amongst the five available.
- The TRP can be interfaced with the production machines with which they can communicate. Various
serial communication software protocols are available of the most famous brands.
- All the models have high performance pumps capable of providing the process with sufficient flows
and pressure to guarantee an excellent temperature distribution. The pressure is constantly
monitored and may be regulated by the operator by means of the regulation by-pass in order to obtain
the best results for the utility. The pumps have special seals and can operate in environments with
temperatures of up to +60°C (140°F).
- The Thermogel units are fitted with automatic loading.
- All the piping, the tank and the connection parts used are made 100% of rust-resistant materials to
guarantee the maximum lifetime. The parts used are all of prime quality and designed to operate in a
continuous cycle in the most stressful environmental and process conditions.
- The Thermogel TRP unit is available with heating powers of 6, 12 and 18 kW by means of low surface
load incoloy heating elements.
- The Thermogel TRP have been designed paying maximum attention to the safety of the operator and
the process against all possible hazards.
|
TRP
