ECODRY® SYSTEM FOR INJECTION MOLDING, BLOW-MOLDING AND THERMOFORMING WITH INDIVIDUAL PROCESS CHILLER/TCU’s

Ecodry System

ECODRY SYSTEM: LOW OPERATING COSTS Closed-Circuit Adiabatic Fluid Cooler
Power consumption: 0.014 kWh/kW - 0.05 kWh/Ton
Clean Water, Low Maintenance, Modular and Expandable.

TOTAL FLEXIBILITY AND REPEATABILITY

• Individual process control of water temperature and flow
• Develop & Store optimum cooling parameters for each mold
• Serial interface for communication with process machine
• High energy savings with the free cooling valve, available in each unit
• No maintenance problems related to water quality
• Preheat molds automatically
• Load and Drain molds automatically

SIMPLE & INEXPENSIVE INSTALLATION
- One set of non-insulated pipes

MICROGEL
Single or Dual Zone
High Performance
Process Chiller
LWT: -5°C to 95°C / 20°F to 200°F
Precision: ± 0.5°C / ± 1°F
Max. Mold ΔT: 1.5°C / 2°F

TURBOGEL
Single or Dual Zone
High Performance
Temperature Control Unit - TCU
LWT: up to 95°C / 200°F
Precision: ± 0.5°C / ± 1°F
Max. Mold ΔT: 1.5°C / 2°F